|
|
Build Your Online Product Catalogs?
| Product Name: |
4zones Conventional Fire Alarm Control Panel
|
| Supply Ability: |
240000pcs |
| Related proudcts |
panel, control panel, alarm control panel, |
| Specifications |
4zones Conventional Fire Alarm Control Panel Security Alarm Host |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
1PC |
| Unit Price: |
120~140USD/PC |
|
4zones Conventional Fire Alarm Control Panel /Security Alarm Host/ Master Control Panel
Products Features
4,8,16 Class B Initiating Device Circuits (IDCs)
? All zones accept conventional ***ectors and any normally open contact device
? Four Class B Notification Appliance Circuits (NACs)
? One Form-A Alarm Relay
? One Form-A Trouble Relay
? One Form-A Supervisory Relay
? 3.0 amps of system power
? Max 30 conventional ***ectors in one zone.
? Auto/Manual mode setting enable walk test.
? Each Zone can be disabled,
? Sound output can be disabled.
? Manual active sound output enabled.
? Able to report short and broken circuit of ***ection zones.
? Designed with standby batteries and ***ce provision for two sealed lead-acid batteries.
? Testing and disable functions.
? Can connect max 32 repeater panels by RS485 communication port
? Dimensions : 14.57 " (37 cm) long X 17.32" (44 cm) high X 3.94"(10cm).
? Weight: 6.6kg (without battery).
Specifications
AC Power
90-270 VAC, 50 Hz, 2.3 amps
Wire size: minimum #14 AWG (2.0 mm 2 ) with 600V insulation
Battery (lead acid only)
Maximum Charging Circuit: Normal Flat Charge¡ª27.6V @ 0.8 amp
Maximum Charger Capacity: 18 Amp Hour batter
Sound Output Device Circuits
General Alarm Zones 1 through 16
Operation: All zones Class B
Normal Operating Voltage: Nominal 24 VDC (ripple = 100 mV maximum)
Alarm Current: 15 mA threshold
Short Circuit Current: 42 mA maximum
Maximum Loop Resistance: 100 ohms
End-of-Line Resistor: 4.7K, ? watt
***ector Loop Current is sufficient to ensure operation of two alarmed ***ectors per zone
Standby Current: 7.26 mA
Three Relays Output
Relay contact rating: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 VAC (resistive)
Nonresettable 24 VDC Power
Maximum ripple voltage: 10 mV RMS Operating Voltage nominal 24 volts
Total DC current available from this output is up to 500 mA
Recommended maximum Standby current is 150 mA |
| Company: |
Shenzhen Zoanco Technology Electronics Co., Ltd.
|
| Contact: |
Ms. Jenny Ning |
| Address: |
4F, Building B1, XinHaoSheng High-Tech Park, YongHe Road, FuYong Town, Baoan District, Shenzhen, China |
| Postcode: |
518103 |
| Tel: |
86-755-23015236 |
| Fax: |
86-755-23015236 |
| E-mail: |
|
|
|
|
Home
